AMF102 CO2 Temp. RH Data Logger

AMF102 CO2 Temp. RH Data Logger

Features: 

1. Super large LCD simultaneously display and log CO2 Level, Temperature, Relative Humidity, Calendar (Y/M/D) and Time (clock).

2. DIGITAL WALL MOUNTABLE/DESK TOP TYPE

3. 40000 data logging memory

4. WARNING CARBON DIOXIDE LEVEL

5. Stable NDIR sensor for CO2 concentration, NDIR (Non-Dispersive Infrared) WAVE GUIDE TECHNOLOGY WITH ABC (Automatic Background Calibration)

6. High and Low setting

7. Alarm function

8. Backlight Function

9. Recall MAX and MIN reading

10. LONG TIME DRIFT COMPENSATION

11. Comes with Power Adaptor

 

Specifications:

1. Large LCD Display: 3.5" (8.9cm) LCD display with backlight

2. Logger mode: Key start/stop, Immediately, Schedule, Real-time & Roll-over

3. Carbon Dioxide (CO2) Range: 0~9999ppm

4. Accuracy: ±50ppm; ±5% reading (0~2000ppm)

5. Response time: 10sec

6. Temperature Range: 0.0~70.0°C (14~158°F)

7. Resolution: 0.1°C/°F

8. Accuracy: ±0.6°C/±0.9°F (0~50°C/32~122°F), others ±1.2°C

9. Humidity Range: 0.1~99.9%

10. Resolution: 0.1%

11. Accuracy: ±3% (10~90%)

12. Logging Memory: 40000

13. Operating Condition: 0~50°C, 0~95%RH

14. Storage Condition: -20~60°C, 0~99%RH

15. Sensor life: 15 years in normal comm.

16. Power Supply: 1A Output 9V AC Adaptor

Re-Calibration:

If the AMF102 reading out of the accuracy, please re-calibration by follows steps:

1. Shut off the meter

2. Keep meter in an open area where the CO2 value around 400ppm

3. Press Left Arrow and Right Arrow button same time, hold it.

4. Press red Power key about 2 seconds, until the LCD display 600 seconds and count down.

5. After 600s count down finish, re-calibration success and ready for measure.