AMT577 Ultrasonic Coating Thickness and Vibration Meter 3 in 1
Features:
1. Pocket size, weight only 250g, easy to carry
2. Can measure the thickness of metal or magnetic materials; can measure the thickness of the coating on the outside of magnetic workpieces; can measure the vibration of the workpiece.
3. No need acoustic coupling agents
4. Low requirements for the surface of the workpiece, no need for polishing treatment on rough surfaces, and non-contact measurement can be achieved
5. Not sensitive to coatings, can achieve thickness measurement of coated workpieces
6. With optional high temperature sensor, can measurement thickness of high-temperature workpieces, temperature compensation can be carried out
7. 1.3 inch high-definition IPS circular LCD screen display, 360° without dead corners
8. 0.42-inch OLED screen with high brightness display of acceleration
9. The instrument consists of a host and a mobile phone, which are wirelessly connected via WiFi
10. The probe and host are integrated machines, and the probe can be replaced
11. After connecting the phone and tablet, there are two functions: A-scan and B-scan
12. Configurable probe types: probe (≤80ºC, short-term measurement), high-temperature probe (≤800ºC, short-term measurement)
13. Configurable high-temperature handle: short handle (meeting the inspection requirements of up to 350ºC, short-term measurement), long handle (meeting the inspection requirements of up to 800ºC, short-term measurement)
Specifications:
1. Thickness range: 1.5~240.0mm
2. Detectable workpiece material: Conductor materials such as carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum, titanium, etc
3. Measurement equipment error range: When the workpiece thickness is less than 10mm, the error is 0.05mm; When the workpiece thickness is >10mm, the error is +(0.01+H/200)mm (H is the workpiece thickness value)
4. Receiver gain: ≤100dB
5. Maximum lifting distance: 9mm
6. Maximum measurement range of coating: 6mm
7. Vibration measurement range: 0~156m/s2
8. Maximum tilt angle of the probe: ±25°
9. Minimum diameter (curvature) of detectable workpiece: 6mm
10. Probe excitation method: Permanent magnet
11. Sound wave type: Shear wave
12. Waveform display: Positive half wave, negative half wave, full wave, RF wave, envelope wave
13. Range of sound speed adjustment for sound waves: 1000~9999m/s
14. High temperature compensation: Equipped with high-temperature sound speed automatic compensation function
15. Power supply: Built in lithium battery, with a working time of no less than 5 hours
16. Low power mode: Support Gecko mode, with standby time of over 20 hours
17. Normal operating temperature range of the host: -10~+50ºC
18. Host storage temperature range: 0-+40ºC
19. Weight: 250g
20. Overall dimensions of the host: 170 × 40 × 35mm
Stanadard Packing:
1: Host
2: Charging data cable
3: Charging plug
4: Instructions
5: Iron based test block
6: Aluminum based test block
Optional Parts:
1. High temperature probe
2. Small diameter probe 10mm
3. Mobile phone
4. Pad
5. Wrist watch
Amtast USA Inc. TEL: amtast1@gmail.com
438 Skyline Dr E Lakeland FL.33809 USA FAX: +1-815-3663903 EMAIL: amtast1@gmail.com
Copyright © 2011~2023 www.amtast.com