amtast1@gmail.com
 
PRODUCTS
Current position:home >> Products >> G~R >> Moisture Meter
 

MC-7828SOIL Soil Moisture Meter

 
 

MC-7828SOIL Soil Moisture Meter

Keywords: soil moisture meter, two-pin soil moisture meter, portable soil moisture meter, soil moisture meter with LED indicators, soil moisture meter for irrigation

The MC-7828SOIL is a portable soil moisture meter with a separate two-pin sensor. It estimates moisture content from the electrical conductivity between the pins and combines a numerical LCD reading with adjustable color-coded indicators. Built-in memory and statistics support comparison of readings across sampling locations.

Key Features

1.  Two-pin conductivity measurement with a 0–80% measuring range.

2.  Digital LCD and green, yellow, and red LEDs for quick moisture assessment.

3.  Adjustable lower and upper alarm limits for the LED indicators.

4.  Automatic temperature compensation and user zero calibration.

5.  Automatically stores up to 99 groups of readings for recall or deletion.

6.  Displays the last reading, mean, maximum, minimum, and reading count.

7.  Automatic power-off helps conserve battery power.

8.  Optional PC connectivity accessories and software for data analysis and printing.

Technical Specifications

ParameterSpecification
ModelMC-7828SOIL
Sensor typetwo-pin conductivity sensor
Measurement range0–80%
Resolution0.1
Accuracy±(0.5%n + 1), as printed in the catalog and manual
Display4-digit LCD with 10 mm characters
Moisture indicationgreen below the lower alarm limit; yellow between the limits; red above the upper limit
Factory alarm limitsAL1 = 13; AL2 = 18; user adjustable
Memory99 groups of readings
Statisticslast value, mean, maximum, minimum, and number of readings
PC interfaceRS232C, as specified in the manual; optional USB or Bluetooth accessories are listed in the catalog
Operating temperature0–50°C
Operating humidity<90% RH
Power supply4 × 1.5V AAA batteries (UM-4)
Main unit dimensions140 × 73 × 35 mm
Sensor dimensions320 × 44 × 44 mm
Pin length150 mm
Pin diameter3 mm
Pin spacing18 mm
Weight280 g, excluding batteries

Applications

1.  Soil moisture checks for crop cultivation and irrigation monitoring.

2.  Comparing soil moisture at different sampling locations.

3.  Monitoring changes in soil moisture over time using recorded readings.

Design and Use

Select a material code appropriate to the soil being tested, insert the pins into the sample, and press the measurement key. Determine the most suitable code by comparing readings with an oven-drying reference for representative samples. Soil type and sampling location can affect code selection and results.

For zero calibration, keep the pins clean and suspended in air, then press the zero key if the display does not read zero. Readings are saved automatically and can be recalled or deleted individually. The LED limits are adjustable; their indications reflect the selected thresholds rather than universal agronomic moisture limits.

Optional

1.  USB data cable with software

2.  Bluetooth data adapter with software

 

Amtast USA Inc.   TEL: amtast1@gmail.com

438 Skyline Dr E Lakeland FL.33809 USA FAX: +1-815-3663903 EMAIL: amtast1@gmail.com

Amtast - Focus on all TEST